No display on booting with beep beep sound

Today one of my worstation desktop gave me a problem. Everytime the desktop in turn on, there is a beep beep sound, and there are no display on the monitor.

The No Display problem when booting is one of the common and complicated problem in troubleshooting computer. Usually the No Display problem when booting can be associated with several major problem with the computer, such as faulty motherboard, faulty graphic card, faulty RAM Module, mostly hardware.

In this case, the beep beep sound when booting gave me the idea of what is causing the No Display problem when booting.

Most of the motherboard nowadays will give a beep beep sound the there is a problem with the RAM Module. And in my case, the culprit is the RAM module.

It seems that the RAM module has oxidized a little bit, and this is causing minimal contact or no contact with the RAM Slot module, which give the desktop workstation a no display when booting the computer.

A quick fix this no display problem with beep sound caused by the RAM Module is simple.

Get yourself a rubber pencil eraser, and clean the contact point of the RAM Module (bronze color). Make sure to use gentle force when cleaning. After cleaning, make sure that there are no remaining residues of the eraser remain on the RAM Module.

Install the RAM module back into the RAM module slot.

This is one of the solution for the No display when booting problem.

Some of the motherboard manufacturer has equipped their motherboard with different beep signal to indicate what are causing the beep and the problem. This usually goes for high end motherboard.